Page 1 of 1
remote launcher plans questions (those who have built it)
Posted: Fri May 29, 2009 8:02 pm
by nowicki2005
I have a question about the type of cable that I'm supposed to be that hooks up to the radio and to the trigger. First is if I need a 1/8 mono plug, what is the other end of the cord supposed to be? Will it matter? For example, there is a plug to a jack, or a plug etc... Does it have to be a mono to mono connection? Does this make sense? lol
Re: remote launcher plans questions (those who have built it)
Posted: Sat May 30, 2009 9:41 am
by MTO4Life
not to jump in with another question, but where did you find plans for a remote launcher? I'm looking. Thanks.
Re: remote launcher plans questions (those who have built it)
Posted: Sat May 30, 2009 10:36 am
by nowicki2005
MTO4Life wrote:not to jump in with another question, but where did you find plans for a remote launcher? I'm looking. Thanks.
http://www.gundogforum.com/resources/Re ... rPlans.pdf
Re: remote launcher plans questions (those who have built it)
Posted: Sat May 30, 2009 10:51 am
by BDBUzi
It shouldn't matter as you will cut off the other end and solder the wires anyway.
But you need the correct one depending on what radios you use.
Re: remote launcher plans questions (those who have built it)
Posted: Sat May 30, 2009 5:54 pm
by SwitchGrassWPG
If you're not past the point of no return, PM me and I'll send you some plans to eliminate the radios and much of what goes in the box. IMO, the radios are the weakest link.