Remote launcher electronics
-
- Rank: Senior Hunter
- Posts: 112
- Joined: Tue Nov 16, 2010 11:51 am
- Location: Galesburg, MI
Remote launcher electronics
Will any remote launcher electronics work on a Scott manual launcher. I've looked at the homemade design instructions, but I'm not exactly mechanically inclined!
Re: Remote launcher electronics
Are you talking about a transmiter and receiver only? Or the linkage between the receiver and the trap?
-
- Rank: Senior Hunter
- Posts: 112
- Joined: Tue Nov 16, 2010 11:51 am
- Location: Galesburg, MI
Re: Remote launcher electronics
The whole unit to turn a mechanical launcher into a remote one.
Re: Remote launcher electronics
The Dogtra and Tri-Tronics need an additional solenoid kit to use with the manual launchers as far as I know - the remote receiver units are very different than the Innotek/LCS/GDS and the DT receivers - these have built in servos with linkages.
Innotek/LCS/GDS
If you do go with the Dogtra or TT - you wil need this kit - http://www.gundogsupply.com/linkage-kit ... onics.html
http://www.gundogsupply.com/linkage-kit ... onics.html
Innotek/LCS/GDS
If you do go with the Dogtra or TT - you wil need this kit - http://www.gundogsupply.com/linkage-kit ... onics.html
http://www.gundogsupply.com/linkage-kit ... onics.html
- Rob
Two barrels next to each other and two triggers - one behind the other!
Two barrels next to each other and two triggers - one behind the other!
-
- Rank: Senior Hunter
- Posts: 112
- Joined: Tue Nov 16, 2010 11:51 am
- Location: Galesburg, MI
Re: Remote launcher electronics
Thanks for the info!