Page 1 of 1

Seneca's ABOVE GROUND KENNELS AND BOTTOM STORAGE TRUCK BOXES

Posted: Tue Apr 10, 2007 10:00 pm
by seneca kennels
At Seneca Kennels and Supplies we provide an all aluminum above ground kennel w/ a cedar deck for long lasting and durability. We also carry a full line of whelping pens, aluminum dog houses and truck boxes.

All of our products can be customized to fit your needs.

FOR PRICING OR TO REQUEST A FREE BROCHURE EMAIL US AT SENECAKENNELS@BRIGHT.NET OR CONTACT US BY PHONE AT 419-447-0968

COME SEE OUR FULL LINE OF PRODUCTS AT

http://www.SenecaKennelsAndSupplies.net

THE BEST TIME TO REACH US BY PHONE IS AFTER 5 P.M. WEEKDAYS AND ANY TIME ON WEEKENDS.

THANKS,
RON RANSOM III

Posted: Wed Apr 11, 2007 2:53 am
by AceofSpades41
Ron,

Nice Product and great website !!!! :D

Posted: Sat Aug 18, 2007 10:00 am
by seneca kennels
we now provide:

Our large kennel with a 3' x 4' x 8' run. (including a 2' cedar deck)

Our x-tra large kennel with a 4' x 4' x 8' run. (including a 2' cedar deck)

You can e-mail us for pricing & photos that currently are not on our site.

Thanks,
Ron Ransom III

www.SenecaKennelsAndSupplies.net

Email: senecakennels@bright.net

Posted: Fri Nov 23, 2007 9:16 pm
by seneca kennels
Image
****ABOVE IS OUR LARGE BIRD DOG KENNEL WITH AN 8' RUN****

Posted: Fri Nov 23, 2007 9:28 pm
by ezzy333
Ron,

Check withGrant about becoming a sponser of GDF. We also would like a link to our forum on your site so we can help each other.

Ezzy

Posted: Thu Dec 20, 2007 9:12 pm
by seneca kennels
This Crate was Constructed to Transport one of our local Police K-9's for the county and our country.
ImageImage
This box was built to provide full ventalation in the summer and provide a warm fully insulated box for the winter. With the fully removable side vent.
ImageImage
It was also equiped with a removable stainless steel water/food dish which can be mounted to the side of the box or to be placed on any door.

Another custom "T" shaped full storage Truck Box.
ImageImage

Image

These particular boxes were built for the county dog wardens. They were provided with Catch Pole storage on side of the boxes, 6" of full top key locking storage and with Catch Pole access doors that are key locking.

ImageImage


We replaced his old wooden runs with 2 sets of Aluminum runs 4' x 5' runs with boxes on the inside of the shed.
Image

Our Ground Kennels.
Image


Thanks for viewing some of our custom jobs,
Ron Ransom III
E-mail senecakennels@bright.net
Web site www.senecakennelsandsupplies.net

Posted: Sat Jan 05, 2008 9:01 pm
by seneca kennels
Below is our set up at Seneca Kennels And Supplies this unit is 40 foot w/ 13 Runs. We have the houses located inside the building.
Image
Image


Next is 7 of our Coon Dog Doubles set up in Texas.
Image

Thanks again,
Ron Ransom III

Posted: Sat Jan 05, 2008 11:52 pm
by midwestfisherman
Nice site and nice looking products. Ron I believe you may know Brad Utrup and his family that live down that way.

I'll be getting a few of the medium sized dog houses when I build my kennels this spring.

Posted: Thu Jan 24, 2008 10:49 pm
by seneca kennels
Here are some photos of our new series of the traveler. We built this one custom to fit a 5' x 10' utility trailer owend by Steve Shipman. She turned out NICE!!!

Some of the custom features are:
3- hole 5' x 10' x 26" Traveler frame.
1" x 1" tube frame on outer walls, front, and top.
Solid diamond plate top.
Waste pans

The Box:
3- hole 56" x 42" x 27"
full top storage
cross ventalated
winter door covers
Image
Image
Image
Image
Image
Image




Thanks,
Ron Ransom III

Posted: Tue Apr 01, 2008 8:43 pm
by seneca kennels
Here are some Custom Boxes we made for a customer in Mississippi. We also supplied the diamond plate for the construction of the access doors on top of the runs.
Boxes measure 60" wide x 24" tall x 24" wide

Image

Image

Image

Posted: Mon Apr 21, 2008 9:27 pm
by seneca kennels
A Custom parrot flight cage. Measures 6' x 6' square 4' tall with a 11" peak. with legs and casters overall is 7' 4". with 2 access doors, fiber glass sun roof, galvanized after welded 1.5" x 1.5" 12 gauge fence and waste pans (not pictured).
Image