Remington 1100 G3 12ga/28in.
- Russmill84
- Rank: Senior Hunter
- Posts: 177
- Joined: Wed Oct 08, 2008 2:13 pm
- Location: Odessa, Texas
Remington 1100 G3 12ga/28in.
Though about getting the g3 for being my duck/pheasant gun. Does anyone here have any experiences with this gun? If so please let me know. Also if you think there is a better semi for that price let me know.
http://www.perfectpedigrees.com/genview.php?id=1845 "Kickstand"
http://www.perfectpedigrees.com/3genview.php?id=2439 "Dash"
" Only those who dare to fail greatly can ever achieve greatly" JFK
http://www.perfectpedigrees.com/3genview.php?id=2439 "Dash"
" Only those who dare to fail greatly can ever achieve greatly" JFK
- Chaingang
- Rank: 5X Champion
- Posts: 899
- Joined: Wed Apr 19, 2006 5:24 pm
- Location: Hanover, Minnesota
Re: Remington 1100 G3 12ga/28in.
I've never had much luck with the 1100's. Lots of jamming issues. Of course those were guns from the late 70's and early 80's. Not sure what the new ones are like so can't comment on them. I'm sure many have used and still use their 1100's and love them, just didn't work out for me.
Anyway since then I have gone on to Beretta and have never looked back. I still have my 22 year old Beretta A302 and while it's not my main hunting gun any longer it still works flawlessly. I have a couple other Beretta autoloaders, one which I just purchased this fall and that is a 391 Urika2 12 ga. Haven't really put enough rounds through it yet to see how this new model will hold up yet, but I'm guessing it will be as reliable as all the others have been.
Don't mean to be pushing Beretta at you, but If cost is a factor Beretta makes a less expensive (under $800) model, the 3901 which is based primarily on a predecessor to the 391 (A390). I believe they make a couple different versions of them in wood or synthetic. I know of some people who use them and love the simplicity as compared to the more complicated gas system of the 391 Urika's.
Anyway since then I have gone on to Beretta and have never looked back. I still have my 22 year old Beretta A302 and while it's not my main hunting gun any longer it still works flawlessly. I have a couple other Beretta autoloaders, one which I just purchased this fall and that is a 391 Urika2 12 ga. Haven't really put enough rounds through it yet to see how this new model will hold up yet, but I'm guessing it will be as reliable as all the others have been.
Don't mean to be pushing Beretta at you, but If cost is a factor Beretta makes a less expensive (under $800) model, the 3901 which is based primarily on a predecessor to the 391 (A390). I believe they make a couple different versions of them in wood or synthetic. I know of some people who use them and love the simplicity as compared to the more complicated gas system of the 391 Urika's.
Last edited by Chaingang on Wed Dec 24, 2008 9:37 am, edited 1 time in total.
- Russmill84
- Rank: Senior Hunter
- Posts: 177
- Joined: Wed Oct 08, 2008 2:13 pm
- Location: Odessa, Texas
Re: Remington 1100 G3 12ga/28in.
looking into berettas..thanks!
http://www.perfectpedigrees.com/genview.php?id=1845 "Kickstand"
http://www.perfectpedigrees.com/3genview.php?id=2439 "Dash"
" Only those who dare to fail greatly can ever achieve greatly" JFK
http://www.perfectpedigrees.com/3genview.php?id=2439 "Dash"
" Only those who dare to fail greatly can ever achieve greatly" JFK
-
- Rank: 5X Champion
- Posts: 1167
- Joined: Fri Jan 18, 2008 12:18 pm
Re: Remington 1100 G3 12ga/28in.
I have heard less than stellar reviews on the G3. In my opinion for the money I would really look into the beretta. I am buying the beretta 3901 for myself. $547.00 at wal mart and you are getting beretta quality. And it actually fits me. I find the remington 100 stocks do not fit me. The Stock is too shallow and I really have to force it onto my cheek. Not a trait I find desirable in a gun. But that is just how they fit me. Might fit you perfectly.
- Russmill84
- Rank: Senior Hunter
- Posts: 177
- Joined: Wed Oct 08, 2008 2:13 pm
- Location: Odessa, Texas
Re: Remington 1100 G3 12ga/28in.
Well I just got back from the shop here in town, and I believe the beretta is amazing...the 1100 G3 was just a little different on the fit. It was a very nice gun though. The Beretta on the other hand just felt short for me...ended up looking at the Weatherby SA08 12/28 and itwas like a miracle fit! Anything on these?? If they are quality like their rifles, I am hands down sold.
http://www.perfectpedigrees.com/genview.php?id=1845 "Kickstand"
http://www.perfectpedigrees.com/3genview.php?id=2439 "Dash"
" Only those who dare to fail greatly can ever achieve greatly" JFK
http://www.perfectpedigrees.com/3genview.php?id=2439 "Dash"
" Only those who dare to fail greatly can ever achieve greatly" JFK
-
- Rank: 5X Champion
- Posts: 1167
- Joined: Fri Jan 18, 2008 12:18 pm
Re: Remington 1100 G3 12ga/28in.
weatherby makes good stuff. I say go for it.
- Chaingang
- Rank: 5X Champion
- Posts: 899
- Joined: Wed Apr 19, 2006 5:24 pm
- Location: Hanover, Minnesota
Re: Remington 1100 G3 12ga/28in.
Being short I take it you mean length of pull or basically the stock is too short. Easily fixed by adding a thicker recoil pad and or spacer to it. Any competent gunsmith can add a half inch or more without too much effort. If your a decent do-it-yourself kind of guy not real difficult if you have the tools. A quick and dirty way would be to add a slip over pad over the existing one adding length that way. Either way if I really like a gun a short stock isn't going to keep me from buying it.Russmill84 wrote:Well I just got back from the shop here in town, and I believe the beretta is amazing...the 1100 G3 was just a little different on the fit. It was a very nice gun though. The Beretta on the other hand just felt short for me...ended up looking at the Weatherby SA08 12/28 and itwas like a miracle fit! Anything on these?? If they are quality like their rifles, I am hands down sold.
Not uncommon to find guns that are too long or short for those of us that are shorter than 5'8" or taller than 6ft. Many aftermarket recoil pads out there in varying thicknesses to choose from. I almost always ditch the factory pads anyway as they don't offer much in the way of comfort and are usually fairly hard. I'm partial to the kickeez pads: http://www.kickeezproducts.com/
- ACooper
- GDF Premier Member!
- Posts: 3397
- Joined: Tue Nov 23, 2004 1:37 pm
- Location: Sometimes I'm in Oklahoma
Re: Remington 1100 G3 12ga/28in.
Cant really talk about the G3, but I would lay a bet that more birds have been killed with an 1100 than any other autoloader. Grew up shooting them, as long as they are dry lubed never a problem.
- postoakshorthairs
- Rank: 4X Champion
- Posts: 648
- Joined: Tue Dec 09, 2008 10:43 am
Re: Remington 1100 G3 12ga/28in.
My wife bought me an 20 g. 1100 two years ago for xmas and it's been very unreliable...as mentioned before tons of jamming issues. It's back in the shop now for a look. I would go with a beretta or franchi. I like the feel and swing of the gun but I don't want a single shot.
- Greg Jennings
- GDF Junkie
- Posts: 5743
- Joined: Tue Apr 20, 2004 11:59 am
- Location: Springboro, OH
Re: Remington 1100 G3 12ga/28in.
Have shot a room full of shells through an 1100. You have to keep them clean and dry-lubed. If you gunk up the works, they'll jam on you in a New York second.
FC Snips Spot-On Shooter SH
http://www.perfectpedigrees.com/4genview.php?id=3149
http://www.perfectpedigrees.com/4genview.php?id=3149
Re: Remington 1100 G3 12ga/28in.
1100's are good guns, dads is reliable but like chaingang said a few jamming issues, but its an older gun too, remington 1187 is a good autoloader too, alot like the 1100's, i duck hunt with a stoeger m2000 and i love it, it has a little trouble cycling low brass, but 3" shells never a problem, also love the inertia system, you may not want one but there pretty much a benelli at a third of the price and will only shoot 2 3/4" and 3", they have inertia system but not the recoil so they kick like a mule when you first get them, nothing a good kick pad cant fix.
-
- Rank: 5X Champion
- Posts: 1167
- Joined: Fri Jan 18, 2008 12:18 pm
Re: Remington 1100 G3 12ga/28in.
How would a 12 gauge handle a 1 oz load? Would it be too light?tanner wrote:1100's are good guns, dads is reliable but like chaingang said a few jamming issues, but its an older gun too, remington 1187 is a good autoloader too, alot like the 1100's, i duck hunt with a stoeger m2000 and i love it, it has a little trouble cycling low brass, but 3" shells never a problem, also love the inertia system, you may not want one but there pretty much a benelli at a third of the price and will only shoot 2 3/4" and 3", they have inertia system but not the recoil so they kick like a mule when you first get them, nothing a good kick pad cant fix.
- Greg Jennings
- GDF Junkie
- Posts: 5743
- Joined: Tue Apr 20, 2004 11:59 am
- Location: Springboro, OH
Re: Remington 1100 G3 12ga/28in.
I've shot a lot of 1 oz loads through an 1100 without issues. I've even done it with a Magnum with a 2-3/4 barrel on it. It works till it gets cold or a little gummed up.
FC Snips Spot-On Shooter SH
http://www.perfectpedigrees.com/4genview.php?id=3149
http://www.perfectpedigrees.com/4genview.php?id=3149
-
- Rank: 5X Champion
- Posts: 1167
- Joined: Fri Jan 18, 2008 12:18 pm
Re: Remington 1100 G3 12ga/28in.
I meant on the M2000
- Russmill84
- Rank: Senior Hunter
- Posts: 177
- Joined: Wed Oct 08, 2008 2:13 pm
- Location: Odessa, Texas
Re: Remington 1100 G3 12ga/28in.
Well I picked up the weatherby, and it is of great quality in its finish. It is a beautiful shot, considering i haven't paid this much for a shotgun ever. I guess you get what you pay for. It shot perfect for me, and did just fine in the -5 windchill we had. Thank you for all the remarks.
http://www.perfectpedigrees.com/genview.php?id=1845 "Kickstand"
http://www.perfectpedigrees.com/3genview.php?id=2439 "Dash"
" Only those who dare to fail greatly can ever achieve greatly" JFK
http://www.perfectpedigrees.com/3genview.php?id=2439 "Dash"
" Only those who dare to fail greatly can ever achieve greatly" JFK
Re: Remington 1100 G3 12ga/28in.
11-87's are very reliable and very easy to clean the mag tube on in order to keep then working good. I shot one for a few years and an occasional wipe down of hte tube and you're good to go (as with all 1100's you have to have a good O ring). I would encourage anyone who wants an autoloader for field use to consider an 11-87 and you can look for an LC model if you want less weight. I see them for very reasonable used prices compared to some of the popular imported guns.
The advantage of any 1100 family of guns is recoil reduction. There still isn't a gun in the price range that kicks less. They are durable as heck too.
The advantage of any 1100 family of guns is recoil reduction. There still isn't a gun in the price range that kicks less. They are durable as heck too.
- Russmill84
- Rank: Senior Hunter
- Posts: 177
- Joined: Wed Oct 08, 2008 2:13 pm
- Location: Odessa, Texas
Re: Remington 1100 G3 12ga/28in.
I just can't say enough about this weatherby guys and gals...this thing is absolutely amazing!! Shot it this last weekend on pheasant and it was truly a remrkable feeling to shoot so well.
http://www.perfectpedigrees.com/genview.php?id=1845 "Kickstand"
http://www.perfectpedigrees.com/3genview.php?id=2439 "Dash"
" Only those who dare to fail greatly can ever achieve greatly" JFK
http://www.perfectpedigrees.com/3genview.php?id=2439 "Dash"
" Only those who dare to fail greatly can ever achieve greatly" JFK