Homemade Welded Kennels
-
- Rank: Senior Hunter
- Posts: 140
- Joined: Mon Jan 07, 2008 4:07 pm
- Location: Topeka, Ks
Homemade Welded Kennels
Anyone weld up their own kennels. I've looked at costs and can order enough material to make 2 10x10 kennels for the price of 1 prebuilt and bought 10x10 kennel. So I've ordered 1.25in. square tube for the outside and 1in. square tube for the support cross. My question is what type of wire should I use. Cattle/Hog pannels, 4x4 square, 2x4 square, rolled wire? Any ideas or opinions? I have 2 shorthairs. Thanks- Charlie
Murphy- RIP
Cali- 3yo Black/White Ticked Patched GSP.... http://www.perfectpedigrees.com/3genview.php?id=1052
Daisy- 3mo Black/White Patched GSP
Cali- 3yo Black/White Ticked Patched GSP.... http://www.perfectpedigrees.com/3genview.php?id=1052
Daisy- 3mo Black/White Patched GSP
- Hotpepper
- Rank: 5X Champion
- Posts: 1490
- Joined: Wed Apr 12, 2006 10:30 am
- Location: Southern Indiana
Re: Homemade Welded Kennels
I would use hog panels as I do now.
The last repair to my kennels and galvanized was to use PVC schedule 40 1 and 1/2 inch. It works great and is easy to work with and with 15 foot panels, stays in place.
Gonna replace the front of the kennel, 4 doors, the same way.
Jerry
The last repair to my kennels and galvanized was to use PVC schedule 40 1 and 1/2 inch. It works great and is easy to work with and with 15 foot panels, stays in place.
Gonna replace the front of the kennel, 4 doors, the same way.
Jerry
2009 NGSPA National Champion R/U
OFA Good 06/09
3 years of Age
http://www.perfectpedigrees.com/4genview.php?id=2071
Jeremiah 29:11
God says He has Plans for Me
OFA Good 06/09
3 years of Age
http://www.perfectpedigrees.com/4genview.php?id=2071
Jeremiah 29:11
God says He has Plans for Me
Re: Homemade Welded Kennels
I would reccomend this http://www.okbrandwire.com/horse-panels.htm for your kennels. I ordered mine from Cleaver Supply in Chanute. There are various lengths and widths available. The 4' X 20' 2X4 panels are $54.00 per.
-
- Rank: Senior Hunter
- Posts: 140
- Joined: Mon Jan 07, 2008 4:07 pm
- Location: Topeka, Ks
Re: Homemade Welded Kennels
Kmack- That looks about like what I would want. Do you know if they have other distributors closer to me in Topeka. Or would I be able to find something similar around here?
Murphy- RIP
Cali- 3yo Black/White Ticked Patched GSP.... http://www.perfectpedigrees.com/3genview.php?id=1052
Daisy- 3mo Black/White Patched GSP
Cali- 3yo Black/White Ticked Patched GSP.... http://www.perfectpedigrees.com/3genview.php?id=1052
Daisy- 3mo Black/White Patched GSP
Re: Homemade Welded Kennels
I think Tractor Supply, Atwoods, etc. carry the 5' X 16' panels (special order)but I am building horse fence (pipe posts with top rail) so I wanted the 4' X 20'. I called Tony McDermott who is the sales rep for this area. He gave me the number for Cleaver in Chanute. He didn't give me any other suppliers names.
-
- Rank: Senior Hunter
- Posts: 140
- Joined: Mon Jan 07, 2008 4:07 pm
- Location: Topeka, Ks
Re: Homemade Welded Kennels
I just shot him an email, we'll see if there is anyone up this way that carries the 6x20 panels.
Murphy- RIP
Cali- 3yo Black/White Ticked Patched GSP.... http://www.perfectpedigrees.com/3genview.php?id=1052
Daisy- 3mo Black/White Patched GSP
Cali- 3yo Black/White Ticked Patched GSP.... http://www.perfectpedigrees.com/3genview.php?id=1052
Daisy- 3mo Black/White Patched GSP
Re: Homemade Welded Kennels
Heck I use Cattle panels with welded wire over it and never had a problem. I cut a 16ft cattle panel in half and then attatch the welded wire on it and then my kennel is complete. I only need one panel because I have the dogs in the building so one wall of the kennel is the building and the other wall is the kennel next to it. So for around 40.00 you have an 8x8 kennel. They are cheap and easy to build or tear down if you need. Hope that makes sense.....
Chris E. Kroll
CEK Kennels
http://www.cekkennels.com
785-288-0461
Governments govern best when governments governs least
-Thomas Paine
CEK Kennels
http://www.cekkennels.com
785-288-0461
Governments govern best when governments governs least
-Thomas Paine
Re: Homemade Welded Kennels
I have one out of Rebar and cattle pannels on all 4 sides and the roof....i had to do this because the dog would climb out of a chain link....It took him a week or so to figure it out but he figured out how to climb through one of those squares about 6"x6" squres....i had to wrap chain link on top of it....i should have went with hog panels as they are the really small squares.
- highcotton
- GDF Premier Member!
- Posts: 870
- Joined: Mon Jan 02, 2006 6:56 pm
- Location: Alabama
Re: Homemade Welded Kennels
That sounds like a good idea. Do any of you have pictures?
Re: Homemade Welded Kennels
I like the looks of those horse panels from OK Brand. The spacing is 2"x4". Is that too big? For those that use welded wire fencing, what spacings do you use? I've seen from 1/2"x1" all the way up to 2"x4" and larger.
- Steven
Justus Kennels.com
Justus James Ayres SH CGC - Justus - Rest in Peace, buddy.
Wind River's JK Clara Belle - Belle
Wind River's JK Black Tie Affair - Tux
Justus Kennels.com
Justus James Ayres SH CGC - Justus - Rest in Peace, buddy.
Wind River's JK Clara Belle - Belle
Wind River's JK Black Tie Affair - Tux
Re: Homemade Welded Kennels
2" X 4" is the standard size on Behlen Country and Priefert runs which I have seen. It should work fine.
Re: Homemade Welded Kennels
Now I notice that the horse panels are 4 and 6 gauge wire. Isn't that pretty thick stuff? There's also welded wire fabric in 12.5 gauge. Would that suffice for kennel runs?
- Steven
Justus Kennels.com
Justus James Ayres SH CGC - Justus - Rest in Peace, buddy.
Wind River's JK Clara Belle - Belle
Wind River's JK Black Tie Affair - Tux
Justus Kennels.com
Justus James Ayres SH CGC - Justus - Rest in Peace, buddy.
Wind River's JK Clara Belle - Belle
Wind River's JK Black Tie Affair - Tux
Re: Homemade Welded Kennels
I have used the welded wire fabric for other fencing. It will work for dog containment. I prefer the larger gauge welded wire panels as they don't required stretching between the posts and to my taste they have a straighter, cleaner appearance.